![hp laserjet p4015n tray 2 pickup solenoid hp laserjet p4015n tray 2 pickup solenoid](http://laserprinterhelp.host4kb.com/admin/media_store/2/AA-05364/4.png)
![hp laserjet p4015n tray 2 pickup solenoid hp laserjet p4015n tray 2 pickup solenoid](https://www.quikshiptoner.com/catalog/images/HP-LaserJet-4250-Tray-1-Front-Cover.jpg)
Reselect the printer driver appropriate for your device.Ī paper jam has occurred in the print path. You are using the incorrect printer driver. The device experienced an internal communication error. The door must be closed before printing can continue. Gears are not rotating correctly, or are damaged or worn,Īn internal error occurred in the device. Move the gears in the cassette pick up drive unit. The cassette separation roller and theĬassette feed rollare are to be replaced together.ĭamaged gears in the cassette pick-up drive unit. See Dc controller PCA.ĭirty, worn, or deformed pick-up roller, cassette separationĬlean the rollers if they are dirty. See Tray 2 lifter-driveĪssembly and/or Printer switches and sensors. The tray 2 lifter-drive assembly or the stack position 1 Disconnect the connector for the tray pickup solenoidįrom the dc controller PCA (location J92).Ģ Measure the resistance between the cable connectors.ģ If the measured resistance is not approximatelyġ60 ohms for the HP LaserJet 4200/4300, or 110 ohmsįor the HP LaserJet 4250/4350, replace the tray 2 The tray 2 pickup solenoid (SL101) is damaged. Replace the pickup drive assembly if the gears areĭamaged. The tray 2 paper pickup assembly drive gears are damagedĬheck the drive gears in the paper pickup drive assembly. If they are dirty after cleaning, or if they are The feed or separation rollers are dirty, worn, or damaged. try lifting the printer off of tray 2 to inspect it or here it is straight from the service manual. There is still paper stuck in the printer. SOURCE: i have a hp laserjet 4250 printer it had a paper